User Manual

86
3
Select a desired value with the button. Finalize by using the
button or the button.
4
Press the shutter button ‘‘half-way’’ to return to the
shooting mode. (The Auto Bracketing icon will be
displayed on the color LCD monitor.)
 The operations in each Drive Mode are shown below.
Single Capture
Each time the shutter button is pressed, an image will
be taken one frame at a time.
Continuous
The set number of frames will be taken continuously
by pressing and holding the shutter button.
Self Timer
2 sec.
Two seconds after pressing the shutter button, the set
number of frames will be taken continuously.
Self Timer
10 sec.
Te n seconds after pressing the shutter button, the set
number of frames will be taken continuously.
CAUTION !!
 This function cannot be used with the interval timer shooting.
 The exposure bracketing can be used with 4 different modes.
P Mode
Both shutter speed and aperture value will be changed.
A Mode
Only shutter speed will be changed.
S Mode
Only aperture value will be changed.
M Mode
Only shutter speed will be changed.
WARNING !!
 Once you set the auto bracketing mode, the camera will continuously
hold that auto bracketing mode until you set the bracketing amount to
“±0.0”.
 Auto Bracketing cannot be used with a flashgun.
 Auto Bracketing cannot be used with Bulb shooting.