User Manual
Table Of Contents
- PACKAGE CONTENTS / ACCESSORIES
- TABLE OF CONTENTS
- SAFETY PRECAUTIONS
- HANDLING PRECAUTIONS
- DESCRIPTION OF THE PARTS
- MONITOR DISPLAY DURING SHOOTING
- BASIC OPERATION AND QUICK REFERENCE
- PREPARATION
- BASIC OPERATION
- ADVANCED OPERATION
- SETTING THE WHITE BALANCE (WB)
- SETTING THE SENSITIVITY (ISO EQUIVALENCY)
- IMAGE FILE SETTING
- SELECTING THE METERING MODE
- AF/AEL BUTTON
- EXPOSURE COMPENSATION
- AUTO BRACKETING
- SFD MODE (SUPER FINE DETAIL)
- COLOR MODE
- CUSTOM BRACKETING
- TONE CONTROL
- COLOR SPACE
- AUTO ROTATE
- CUSTOM MODE
- USING THE EXTERNAL FLASH
- USING Eye-Fi CARD (Eye-Fi Connected)
- REVIEWING AND DELETING IMAGES
- OTHER REVIEWING FEATURES
- CHANGING OTHER SETTINGS
- CONNECTING TO A COMPUTER OR TV
- REFERENCE
50
P PROGRAM AE
To make picture taking easier, the camera will automatically select an
appropriate combination of shutter speed and aperture value, according to
the brightness of the subject.
1
Set the Exposure Mode to the P position.
(In the Viewfinder, the exposure indicator
is illuminated in green.)
2
Press the shutter button “half-way” to
verify the focus and take the picture.
WARNING !!
When is shown on the color LCD monitor, camera shake may
occur (a slow shutter speed is set). If this mark is displayed, please use
the flash (P.99) or a tripod.
If the subject is too bright or dark, both shutter speed and aperture value
indicators will blink and will show the limit values. If you take a picture
with these settings, the picture will be overexposed or underexposed.
PROGRAM SHIFT
You can change the combination of shutter
speed and aperture value, which were
automatically selected by the camera.
While turning the Front Dial, the
combination of shutter speed and aperture
value will change within the range of
combinations that give the equivalent
exposure.
It will be canceled automatically, after
taking the picture.