User Manual

SIGLENT
SVA1000X Service Manual 9
Interface Test
The SVA1000X series spectrum analyzer is designed with four standard
interfaces: USB Host, USB Device, LAN and a 3.5 mm mono jack for an
earphone. Being connected to other instruments via these interfaces enables
the analyzer to achieve even more enhanced capabilities. In order to ensure
the analyzer is operating properly, it is recommended to first test the interfaces.
USB Host Test
To test if the USB Host interface is working normally.
Tools:
● USB memory device (U disk)
Steps：
1. Insert a U disk into the USB Host interface on the front panel of the spectrum
analyzer.
2. An icon shaped like a U disk appears on the upper right of the screen, as
shown in figure below. The icon appearance indicates the U disk has been
successfully recognized.
Figure 2-1 USB drive has been properly recognized