User Manual

SIGLENT
SVA1000X Service Manual 7
Prepare Information
Before initiating performance verification or any adjustments, it is
recommended to follow these procedures. The following topics are discussed
in this chapter.
 How to perform functional checks
 How to operate four standard interface tests
 How to use the self-calibration routine
 How to recall factory Default settings
For more detailed information about analyzers operation, please refer to the
SVA1000X User Manual.
Functional check
There are three types of checks used to determine if the spectrum analyzer is
operating properly.
Power-on Inspection
The normal operating voltage for SVA1000X series spectrum analyzers is in
the range of 100-240 VRMS, 50 Hz/ 60 Hz/ 440 Hz.
Please use the power cord provided as accessories to connect the instrument
to the power source as shown in the figure below.
Figure 1-1 Connect power cord
The socket