Programming Guide

Table Of Contents
SIGLENT
SVA1000X Programming Guide 43
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > M→CF
Example
:CALCulate:MARKer1:CENTer
3.6.1.12 Marker to Center Frequency Step
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:STEP)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:STEP
Instruction
This command sets the center frequency step equal to the specified marker
frequency. This command is not available in zero span.
This command is valid when the Marker is on.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > M→CF Step
Example
:CALCulate:MARKer1:STEP
3.6.1.13 Marker to Reference Level
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:RLEVel)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:RLEVel
Instruction
This command sets the reference level equal to the specified marker frequency.
This command is valid when the Marker is on.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > M→Ref Level
Example
:CALCulate:MARKer2:RLEVel
3.6.1.14 Marker Delta to Span
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8:DELTa[:SET]:SPAN)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:DELTa[:SET]:SPAN
Instruction
This command sets the span equal to the specified delta marker frequency.
This command can be only used in DELTa|BAND marker mode, Reference
Command:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE
Parameter
Type
None