Programming Guide

Table Of Contents
SIGLENT
42 SVA1000X Programming Guide
Parameter
Type
Boolean
Parameter
Range
ON|OFF|0|1
Return
0|1
Default
0
Menu
Marker > Marker Table
Example
:CALCulate:MARKer:TABLe ON
3.6.1.9 Marker to Start Frequency
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:START)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:START
Instruction
Sets the start frequency to the value of the specified marker frequency. This
command is not available in zero span.
If the Marker is OFF, it will set the marker on center.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > M→Start Freq
Example
:CALCulate:MARKer1:START
3.6.1.10 Marker to Stop Frequency
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:STOP)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:STOP
Instruction
Sets the stop frequency to the value of the specified marker frequency. This
command is not available in zero span .
This command is valid when the Marker is on.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > Marker→Stop Freq
Example
:CALCulate:MARKer1:STOP
3.6.1.11 Marker to Center Frequency
(:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:CENTer)
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:CENTer
Instruction
This command sets the center frequency equal to the specified marker
frequency, which moves the marker to the center of the screen. This command
is not available in zero span.
This command is valid when the Marker is on.