User Manual

SIGLENT
SSG3000X User Manual 71
2.7.1.8 Level Offset
The default is ―Off‖.Click the slide switch to switch the power offset switch status.
 On: The values can be set by the touch screen keyboard or front panel keypad.The
displayed value will be the actual measurement plus the offset.This feature makes
measurements easier when there are amplifiers and attenuators in the middle of the
signal chain.
 Off:The display is consistent with the actual reading of the power sensor.
2.7.1.9 Averaging Mode
The default is ―Auto‖.Click the slide switch to switch the averaging mode.
 Auto: Automatically configure the average number of times based on the current
parameters.Fixed noise parameter settings will be automatically hidden.
 Manual: Manually set the average number times, with the parameter are behind.
 Fixed Noise:The power sensor will control the internal noise that does not exceed
the set value of the fixed noise parameter.Fixed noise parameter settings will be
displayed.It can be set by the touch screen keyboard or the front panel keypad.
Note:If the power sensor does not have a ―fixed noise‖ mode, this option will not be
displayed in the drop down box.
2.7.1.10 Logging
The default is ―Off‖. Click the slide switch to switch the logging.
 On:The source will record the measurements and save it in a log file.
 Off:The signal source does not record the measurements.