User Manual

SIGLENT
SSG3000X User Manual 62
2) IP Address
Configure the network IP address.
Press UTILITY->Interface ->IP Address, then move the cursor to specified location and
press numberkeys to input value, finally press ENTER to make the setup effective.
3) Subnet Mask
Configure the network subnet mask.
Press UTILITY->Interface ->Subnet Mask, then move the cursor to specified location and
press number keys to input value, finally press ENTER to make the setup effective.
4) Gateway
Configure the network subnet mask.
Press UTILITY->Interface ->Gateway, then move the cursor to specified location and
press number keys to input value, finally press ENTER to make the setup effective.
2. Web Setting
Set the web login password.
Press UTILITY->Interface ->Web PasswordSetting, to enter the current password. After
correctly entering the password, a new password can be set in New Password. Then make
the setup effective by entering the new password again in Confirm Password. If the
password needs to be reset to default, just click the Reset to default button. (The default
pass word is ―siglent‖.)
3. GPIB Setting
Set the GPIB address from 1 to 30. SSG3000X must use the SIGLENT USB-GPIB
interface (optional) connected to the USB Host port located on the rear panel.
Press UTILITY->Interface ->GPIB Address, and then press number keys to input value,