User Manual

SIGLENT
SSG3000X User Manual 55
2.5.1.5 LF Shape
Select LF-> LF Source->LF Shape, you can select the LF output signal waveform.
Current waveform types are ―sine wave‖, ―square wave‖, ―Sawtooth wave‖, ―triangle wave‖,
and ―DC‖. The default LF output signal is the ―sine wave‖ waveform.LF phase
2.5.1.6 LF Phase
Select the LF-> LF Source ->LF Phase you can set the LF phase, the setting range is
-360° ~ 360°, and supports degrees or radian units.
2.5.2 LF Sweep
2.5.2.1 Sweep State
Select LF->LF Sweep->Sweep State to activate the LF frequency sweep signal
generation.
2.5.2.2 Start Freq
Select LF->LF Sweep ->Start Freq to set the start frequency.
2.5.2.3 Stop Freq
Select LF->LF Sweep ->Stop Freq. to set the stop frequency.