User Manual

SIGLENT
SSG3000X User Manual 52
As shown, the page consists of the upper drawing area and the lower control area:
1) Plot area: A schematic diagram of the waveform generated from the data entered in
the current pulse sequence table. The vertical direction represents the high and low level
changes of each pulse signal in the pulse sequence, and the position of the high and low
levels in the direction is unchanged; The horizontal direction represents the high and low
level duration of each pulse signal in the pulse sequence. You can use the zoom feature to
observe different details of the waveform.
2) Control area: Click the button to return to the previous pulse sequence table edit
page; Click the button to restore the waveform to the initial state; Click the
button to view the current waveform center position. Zoom in; Click the button to
zoom out the center position of the current waveform; The ―Zoom Position‖ parameter
control displays the center position of the current waveform, and the operations of the
―Zoom In‖ and ―Zoom Out‖ buttons are based on this position. It can be set by touching
screen keyboard or pressing the front panel keypad to shift the current waveform to the
corresponding position.