User Manual

SIGLENT
SSG3000X User Manual 35
arrives.
 Negative: A sweep is triggered when the falling edge of the external trigger signal
arrives.
Note: The trigger edge control is displayed only when the trigger mode or point trigger
mode is ―Ext‖, and is hidden in other cases.
When performing a sweep operation, the order of priority that satisfies the required
conditions from high to low is: Single sweep -> trigger mode -> point trigger mode.
For example, when the ―trigger mode ― and ―point trigger mode‖ are both selected as ―key‖:
In the ―continuous sweep‖, first press the Trigger key to satisfy the trigger mode, and then
press the Trigger key again to meet the point trigger sweep mode to begin sweep. In the
―single sweep‖, you need to press Execute single sweep first to meet the single sweep
conditions, and then press the Trigger key two times to meet the sweep cycle trigger and
point trigger conditions to begin sweep.