User Manual

SIGLENT
SSG3000X User Manual 27
frequency point within the frequency range of the instrument to compensate for losses in
the cable, or losses caused by other equipment.
1. Flatness Menu
 Keypad operation
Press LEVEL->Flatness to make the focus fall on the flatness menu, then press the
knob or ENTER key to switch flatness status. When opened, the status bar displays
the blue UF letters.
 Touch operation
Click on SHORTCUT->LEVEL ->Flatness to make the focus fall on flatness switch.
Then click on the switch button to switch the flatness status.
Note: Flatness correct is enabled when the indicator shows the blue colored ―I‖ and
the status bar will display blue ―UF‖.When disabled,the Flatness indictor will display a
grey ―0‖.
2. Flatness settings
Press LEVEL->Flatness, and then click the gear icon to enter the flatness list edit page.
Table 2-1Flatness correction list
ROW
Frequency
correction（dB）
1
2
1) Inset
Press to insert a new row after the last row.
2) Delete
Press to delete the selected row.
3) Empty