User Manual

SIGLENT
SSG3000X User Manual 24
 Use the numeric keypad to input the desired value and press the unit button to select
the desired unit. Optional units are dBm, dBuV, uV, mV, V, nW, uW, mW and W. Press
ENTER to select the current unit by default.
 Press ENTER or press the knob to enter the parameter editing state, and then use
the left and right direction keys to move the cursor to the desired position. Press the
up and down direction keys, rotate the knob or press the numeric keypad to modify
the value. Press ENTER, knob or ESCto exit the editing mode.
2. Touch screen operation
Click on SHORTCUT ->LEVEL->Level to enter the interface of RF output level setting.
 Click the level parameter, then pop up the keypad interface, then click the number
symbol in the keypad to change the value. Click the unit to modify the unit. Click the
check mark to confirm the modified value and selected unit.
 Long press edit box to enter the edit mode. Press the up and down direction keys,
rotate the knob or press the numeric keypad to modify the value, and press the
ENTER key, knob or ESC key to exit the edit mode.
2.2.2 Level Offset
Setting the level offset from the RF signal’s level
Application: When connecting a fixed attenuation or gain, the level value after attenuation
or amplification can be directly read and set on the RF source by setting a level offset.
When level offset is not zero, the status bar will display OFFSET in blue.
1. Keypad operation
Press LEVEL-> Level Offset to make the focus fall on this parameter item.
 Use the numeric keypad to input the desired value. Press ENTER or click the check