User Manual

SIGLENT
SSG3000X User Manual 22
 Press ENTER or press the knob to enter the parameter editing state, and then use
the left and right direction keys to move the cursor to the desired position. Press the
up and down direction keys, rotate the knob or press the numeric keypad to modify
the value. Press ENTER, knob or ESC to exit the editing mode.
2. Touch screen operation
Click on SHORTCUT->FREQ->Phase Offset to enter the interface of phase offset
setting.
 Click the phase offset parameter, then pop up the keypad interface, then click the
number symbol in the keypad to change the value. Click the unit to modify the unit.
Click the check mark to confirm the modified value and selected unit.
 Long press the edit box to enter the edit mode. Press the up and down direction keys,
rotate the knob or press the numeric keypad to modify the value, and press the
ENTER key, knob or ESC key to exit the edit mode.
Click on SHORTCUT->FREQ->Reset phase delta display to reset the display phase
offset to 0 deg.