User Manual

SIGLENT
SSG3000X User Manual 5
parameters.
LF
Set LF state, LF level, LF frequency and other related parameters.
MOD
Set various modulation parameters (AM, FM, PM and PULSE).
I/Q
Set IQ related parameters
ESC/Close
During the parameter or editing process, pressing this key will clear the
input of the active function area and exit the parameter input state.
Press this button to return to local control of previously operating the
instrument remotely.
Trigger
When the trigger type is set to Key, press this button to perform one
operation.
MOD
ON/OFF
The main switch of various modulation modes.
RF ON/OFF
RF signal output switch
PRESET
Press this button to revert to the default parameter. The default
parameters refer to the default parameter table.
UTILITY
System and file related operations
HOME
You can get back to the main interface quickly
1.3.2 Front Panel Key Backlight
The on/off state and the color of the backlights of some keys at the front panel indicate the
working state of the SSG. The states are as listed below.
1. Power Switch
 Light on and off alternatively, in breathing state: indicate the unit is in stand-by state.
 Constant on: indicate the instrument is in normal operating state.
2. Mode ON/OFF
When the Mode ON/OFF is set to turn on the modulation, the light will turn on, turn off the