User Manual

SIGLENT
SSG3000X User Manual 93
Figure 4-3 LAN Configure
The SSG will be detected automatically or manually as a new LAN point.
4.1.3 GPIB: Connecting via the USB-Host port
Refer to the following steps to finish the connection via USB:
1. Install NI-VISA on your PC for GPIB driver.
2. Connect the SSG USB Host port to a PC’s GPIB card port, with SIGLENT USB-GPIB
adaptor.
3. Switch on the SSG
Figure 4-4SIGLENT USB-GPIB Adaptor
4. Press button on the front panel System→Interface→GPIB to enter the GPIB number.
The SSG will be detected automatically as a new GPIB point.