User Manual

SIGLENT
SSG3000X User Manual 69
2.7.1.2 Sensor State
The default is ―off‖. Activate/deactivate level measurement by the power sensor.
 On:Turn on the power sensor measurement function, and the measurement control
refreshes the power sensor measurement value in real time.
 Off:Turn off the power sensor measurement function.
2.7.1.3 Measurement
Indicate the current reading of the sensor.
Select the unit used for result display. You can change the unit for the result display: dBm,
dBμV, uV, mV, V, nW, uW, mW, W.
2.7.1.4 Level Control
With the Level Control function, you can achieve very stable and accurate RF power your
DUT. With the aid of a downstream control circuit, a CLPC (Closed Loop Power Control),
you can detect frequency response characteristics of the components: such as losses due
to cables, modules or components and compensate these effects accordingly.
2.7.1.5 Statistics
The default is ―off‖.When activated, statisticsindicate the measured mean, maximum,
minimum and the count of each measurement...
 On:Turn on the statistics function.Each statistical parameter is displayed on the
parameter bar.Statistical parameters include average, minimum, maximum, and
statistics.Click the ―Clear‖ button to clear all current statistics and start new statistics.
 Off:Turn off statistics.Statistical parameters will be hidden