User Manual

SIGLENT
SSG3000X User Manual 61
8. Time Setting
Set the display time of the instrument.
Press UTILITY->Setting ->Time Setting, then move the cursor to specified location and
change the time by inputting the value.
2.6.1.2 System Info
Press UTILITY->System Info to view the instrument's system information, including:
 Startup Times
 Model
 Software Version
 Hardware Version
 Host ID
 Serial Number
2.6.1.3 Interface
Press Utility ->Interface to view the instrument's remote control interface information,
including:
1. LAN Setting
1) DHCP
Set the state of DHCP.
Press UTILITY->Interface ->DHCP State, then press ENTER or knob to change the state.
When the DHCP state is on, the network DHCP server will configure the IP address, subnet
mask and gateway automatically according to the current network condition.
When the DHCP state is off, the IP address, subnet mask and gateway will be configured
by the user.