User Manual

SIGLENT

SSG3000X User Manual 59

 User: The user specified configuration will be loaded when PRESET is pressed. After

―User‖ is selected, click button to load the configuration file. For detailed

operation procedure please refer to ―Store/Recall‖

4. Factory Default

Restore the instrument configuration to factory settings.

Press UTILITY->Settings->Set to factory defaults, set the instrument parameters and

status to factory defaults.

Restore factory settings.In addition to loading the default settings, the following functions

and parameters will be configured.

Table 2-2 Factory default

Parameter

Default

Setting

Language

Chinese/English(depend on factory

config)

Preset

Default

Beeper

Screen Saver

Off

Power On

Off

Interface

DHCP State

Off

IP Address

10.11.13.220

Subnet Mask

255.255.255.0

Gateway

10.11.13.1

GPIB Address

Level