User Manual

SIGLENT
SSG3000X User Manual 44
2.4.4 Pulse Modulation (PULSE)
Pulse Modulation represents the process of modulating an RF carrier signal with a pulse
signal as a modulated signal.
2.4.4.1 Pulse State
Select MOD->PULSE->Pulse Stateto turn Pulse on or off.
2.4.4.2 Pulse Out
Select MOD->PULSE->Pulse Outto turn Pulse Out on or off. The default is off.
 On: Turn on the pulse output function. At this time, the signal source outputs the pulse
signal generated by the internal pulse generator from the [PULSE IN/OUT] connector on
the rear panel.
 Off: Turn off the pulse output function.
Notes: When the modulation source is ―Ext‖, the pulse output function will be turned off
automatically.