User Manual

SIGLENT
SSG3000X User Manual 32
Each line parameter represents the setting of each sweep point:
1) Number: Indicates the row number of the sweep point.
2) Frequency: Indicates the frequency of the sweep point.
3) Level: Indicates the level of the sweep point.
4) Time: Indicates the dwell time of the sweep point.
2.3.4 Direction
Sweep direction state is ―up‖ by default. The SSG3000X provides two types: ―up‖ or
―down‖. Click the drop-down box to enable the corresponding sweep direction.
 UP: The signal generator sweeps from the start frequency or start level to the stop
frequency or stop level. The progress bar displayed in the parameter bar is swept
from left to right.
 DOWN: The signal generator sweeps from the stop frequency or stop level to the
start frequency or start level. The progress bar displayed in the parameter bar is
swept from right to left.
2.3.5 Sweep Mode
Default Sweep mode is ―continuous‖. The SSG3000X offers ―continuous‖ or ―single‖
sweep modes. Click the drop-down box to enable the desired mode.
 Continuous: When the trigger condition is met, the signal generator is continuously
swept with the current settings.
 Single: When Execute single sweep is clicked, the signal generator executes a
single sweep with the current settings.
2.3.6 Trigger Mode
The default trigger mode is ―Auto‖. The SSG3000X provides four types of trigger mode: