User Manual

SIGLENT
SSG3000X User Manual 30
automatically when the other is on.
1) Start Freq: Initial frequency setpoint of the sweep.
2) Stop Freq: Final frequency setpoint of sweepsetting the stop sweep frequency.
3) Start Level: Initial amplitude level set point of the sweep
4) Stop Level:Final amplitude level set point of the sweep.
5) Dwell time: The interval time between two sweep points.
6) Sweep points:The number of points in a sweep .Every point is interpolated between
the start parameter and stop parameter.
7) Sweep shape: Click the drop-down box, Sawtooth and triangle can be selected
 Sawtooth: Sweep period is always from the start frequency or start level to the stop
frequency or stop level. The sweep sequence is similar to a "Sawtooth wave".
 Triangle: Sweep period is always from the start frequency or start level to the stop
frequency or stop level, and then return back to the start frequency or start level. The
sweep sequence is similar to a "triangle wave".
8) Sweep Space: Click the drop-down box, linear and log can be selected Note: Level
sweep only support the line sweep mode. List Sweep
2.3.3 List sweep
The list sweep state is off by default. Click the slide to switch the on-off state. Click the
"more setting" to enter the table edit page of list sweep.
Note: The List sweep and step sweep are mutually exclusive. One will shut off
automatically when the other is on.