User Manual

SIGLENT
SSG3000X User Manual 14
2. RF frequency
RF output frequency setting. When the scan type is "frequency" or "frequency &
amplitude", the frequency scanning progress bar is displayed.
3. RF level
RF output level setting. When the scan type is "amplitude" or "frequency &amplitude", the
level scanning progress bar is displayed.
4. Touch screen display area: Display the settings under each menu
 I/Q：I/Q output state
 LF：LF output state and LF waveform displayed. Sine, Square, Sawtooth, Triangle
and DC can be set up.
 MOD ： Modulation state. Amplitude modulation, frequency modulation, phase
modulation, or pulse can be set.
 RF：RF output state.
 Power sensor：Display the current reading of the power sensor after accessing the
power sensor.
5. Menu
Switch menu and display menu after entering each function.