User Manual

SIGLENT
SSG3000X User Manual 13
1.5 User interface
Figure 1-11 User Interface
1. Prompt status bar
 Display Local (local), Remote (remote). When Remote is displayed, the instrument is
being controlled by a remote computer and the front panel input will be locked .To
unlock the front panel (enter Local mode).Esc/Close to quit.
 Ext: Ext Ref shows that the SSG is using an external 10 MHz reference.
 LF: Low frequency signal generator state.
 MOD: The modulation state mode is turned off, the blue is turned on, and the gray is
closed.
 RF: The RF output state.
 SWEEP: The status of the sweep state.UNLEVEL: Indicates that the amplitude
accuracy may not be within the scope of the specification index.
 UF: Amplitude flatness function enable.
 OFFSET: Amplitude offset enable.
 ：The identification is displayed when a USB disk is inserted
 LAN：LAN state. Indicates that LAN is successfully connected. indicates that
there is no network connection or network connection failed