User Manual

SIGLENT
SSG3000X User Manual 9
1.4 Rear Panel
Figure 1-10 Rear Panel
1. AC power input terminal
The RF signal source can operate with AC power from specifications of the AC power
supply supported by RF signal source are 100 V - 240 Vat 45 Hz - 440 Hz. Please connect
the RF signal source to the AC power supply with the supplied power cord.
2. Ground
System groundterminal.
3. LAN interface
Used to link the RF signal source to the computer or computer network, the SSG3000X is
VXI-11 compliant, supports remote commands based on Socket and Telnet, and uses
WEB for remote control. It can quickly build test systems with other standard equipment.
4. USB host