User Manual

SIGLENT
SSG3000X User Manual 3
1.2 Preparing for Use
1.2.1 Adjust the Supporting Legs
For benchtop operation, you may want to use the supporting legs.Adjust the supporting
feet appropriately to tilt the RF signal source upwards.
Figure 1-4 before adjusting Figure 1-5 after adjusting
1.2.2 Connect to AC Power Supply
The RF signal source accepts 100-240V, 50/60/440Hz AC power supply. Please use the
power cord provided to connect the instrument to the power source as shown in the figure
below.
Figure 1-6 Power Interface