User Manual

SIGLENT
SSG3000X User Manual 97
4.3 Remote Control Capabilities
4.3.1 User-defined Programming
Users can use SCPI commands to program and control the signal generator. For details,
refer to the introductions in ―Programming Guide‖.
4.3.2 Send SCPI Commands via NI MAX
Users can control the signal generator remotely by sending SCPI commands via NI-MAX
software. NI_MAX is National Instruments Measurement and Automation Explorer. It is an
executable program that enables easy communication to troubleshoot issues with
instrumentation.
4.3.2.1 Using USB
Run NI MAX software.
1. Click ―Device and interface‖ at the upper left corner of the software;
2. Find the ―USBTMC‖ device symbol
3. Click ―Open VISA Test Panel‖ option button, then the following interface will appear.
4. Click the ―Input/Output‖ option button and click the ―Query‖ option button in order to
view the operation information.