User Manual

SIGLENT
SSG3000X User Manual 92
Figure 4-1 USB Device
The SSG will be detected automatically as a new USB hardware.
4.1.2 Connecting via the LAN port
Refer to the following steps to finish the connection via LAN:
1. Install NI-VISA on your PC for VXI driver. Or without NI-VISA, using socket or telnet in
your PC’s Operating System.
2. Connect the SSG to PC or the local area network with a LAN cable
3. Switch on the SSG
Figure 4-2 LAN
4. Press button on the front panel System→Interface→LAN to enter the LAN Configure
function menu.
5. Select the IP Configure between Static and DHCP
 DHCP: the DHCP server in the current network will assign the network parameters
automatically (IP address, subnet mask, gate way) for the SSG.
 Static: you can set the IP address, subnet mask, gate way manually. Press Apply.