User Manual

SIGLENT
SSG3000X User Manual 91
Chapter 4 Programming Overview
The SSG3000XSignal Generator features a LAN, USB Device, and SIGLENT
GPIB—USB module interfaces. By using a computer with these interfaces, and a suitable
programming language (Python, C+, .NET, etc, and NI-VISA software), users can
remotely control the signal generatorusing standard SCPI (Standard Commands for
Programmable Instruments) commands. The SSG3000X Programming Guide features
more details on the specific commands.
This chapter introduces how to build communication between the signal generator and a
controller computer with these interfaces.
4.1 Remote Operation
The SSG provides both the USB and LAN connection which allows you to set up a remote
operation environment with a controller computer. A controller computer could be a
personal computer (PC) or a minicomputer. Some intelligent instruments also function as
controllers.
4.1.1 Connecting via the USB Device port
Refer to the following steps to finish the connection via USB-Device:
1. For standard installations, you can use NI-VISA on your PC for the VXI driver. If you
wish to control the instrument without NI-VISA, use sockets or telnet.
2. Connect the SSG USB Device port to a PC with a USB A-B cable.
3. Switch on the SSG