Programming Guide

SIGLENT
90 SSA3000X Plus Programming Guide
Command
Format
[:SENSe]:POWer[:RF]:ATTenuation:AUTO OFF|ON|0|1
[:SENSe]:POWer[:RF]:ATTenuation:AUTO?
Instruction
Sets the input attenuator
Gets the input attenuator
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return
0|1
Default
0
Menu
Amplitude > Attenuator
Example
[:SENSe]:POWer[:RF]:ATTenuation:AUTO ON
Command
Format
:TRACe1|2|3|4:Y[:SCALe]:RLEVel <value>
:TRACe1|2|3|4:Y[:SCALe]:RLEVel?
Instruction
This command sets the reference level for the Y-axis.
Gets reference level.
The command is valid if the measurement mode is ASK, FSK, MSK, PSK,
QAM and the data format is not Syms/Errs.
Parameter
Type
Float
Parameter
Range
If the display type is Log Mag: -1000 ~ 1000
If the display type is Lin Mag: -1000 ~ 1000
If the display type is Real: -1000 ~ 1000
If the display type is Imag: -1000 ~ 1000
If the display type is I-Q: -1000 ~ 1000
If the display type is Constellation: -1000 ~ 1000
If the display type is I-Eye: -1000 ~ 1000
If the display type is Q-Eye: -1000 ~ 1000
If the display type is Wrap Phase: -1000 ~ 1000
If the display type is Unwrap Phase: -1000 ~ 1000
If the display type is Trellis-Eye: -1e5 ~ 1e9
Return
Float
Default
Menu
Amplitude > Ref Level
Example
:TRACe4:Y:RLEVel 2
Command
Format
:TRACe1|2|3|4:Y[:SCALe]:PDIVision <value>
:TRACe1|2|3|4:Y[:SCALe]:PDIVision?
Instruction
This command sets the per-division display scaling for the y-axis .
Gets Scale/Div when scale type.
The command is valid if the measurement mode is ASK, FSK, MSK, PSK,
QAM and the data format is not Syms/Errs.
Parameter
Type
Float