Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
80 SSA3000X Plus Programming Guide
Return
Float, Unit: Hz
Default
3 MHz
Menu
Meas > CNR > Noise BW
Example
:CNRatio:BANDwidth:NOISe 1 MHz
Command
Format
[:SENSe]:CNRatio:OFFSet <freq>
[:SENSe]:CNRatio:OFFSet?
Instruction
Sets Freq Offset
Gets Freq Offset
Parameter
Type
Float, Unit: Hz, kHz, MHz, GHz
Parameter
Range
-3.1999999 GHz ~ 3.1999999 GHz
Return
Float, Unit: Hz
Default
3 MHz
Menu
Meas > CNR > Freq Offset
Example
:CNRatio:OFFSet 1 MHz
Command
Format
:MEASure:CNRatio?
Instruction
Query CNR
Parameter
Type
None
Parameter
Range
None
Return
Float
Default
None
Menu
Meas > CNR
Example
:MEASure:TOI?
Command
Format
:MEASure:CNRatio:CARRier?
Instruction
Query Carrier Power
Parameter
Type
None
Parameter
Range
None
Return
Float
Default
None