Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
64 SSA3000X Plus Programming Guide
Instruction
Sets limit test start.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Limit > Test
Example
:CALCulate:LLINe:TEST:STARt
Command
Format
:CALCulate:LLINe:TEST:STOP
Instruction
Sets limit test stop.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Limit > Test
Example
:CALCulate:LLINe:TEST:STOP
Command
Format
:CALCulate:LLINe:TEST:STATe?
Instruction
Gets limit test state.
Parameter
Type
None
Parameter
Range
None
Return
0|1
Default
OFF
Menu
Limit > Test
Example
:CALCulate:LLINe:TEST:STAT?
Command
Format
:CALCulate:LLINe[1]|2:STATe OFF|ON|0|1
:CALCulate:LLINe[1]|2:STATe?
Instruction
Sets limit line state.
Gets limit line state.
Parameter
Type
Boolean
Parameter
OFF|ON|0|1