Programming Guide

SIGLENT
SSA3000X Plus Programming Guide 53
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:TRACe 1|2|3|4
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:TRACe?
Instruction
This command assigns the specified marker to the designated trace 1, 2, 3
or 4.
Gets the specified marker to which trace.
Parameter
Type
Enumeration
Parameter
Range
MARKer:1|2|3|4|5|6|7|8
TRACe:1|2|3|4
Return
Enumeration
Default
1
Menu
Marker > Select Trace
Example
CALCulate:MARK1:TRAC 1
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:RELative:TO:MARKer
1|2|3|4|5|6|7|8
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:RELative:TO:MARKer?
Instruction
Sets marker relative to.
Gets marker relative to.
Parameter
Type
Enumeration
Parameter
Range
1|2|3|4|5|6|7|8
Return
Enumeration
Default
1
Menu
Marker > Relative To
Example
:CALCulate:MARKer1:RELative:TO:MARK 3
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:X <para>
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:X?
Instruction
This command positions the designated marker on its assigned trace at the
specified trace X value.
The value is in the X-axis units, which can be a frequency or time.
The query returns the current X value of the designated marker.
When the readout mode is frequency, the query returns the X value of the
span of the marker in integer and the unit is “Hz”.
When the readout mode is time or period, the query returns the X value of
the span of the marker in scientific notation and the unit is “s”.
Reference Command:
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:X:READout
Parameter
Type
Frequency: Float, unit: Hz, kHz, MHz, GHz, Default “Hz”
Time: Float, unit: us, ms, s, ks, Default “s”
Parameter
Range
0 Hz ~ 1.5 GHz or 10 ms ~ 1000 s
Return
Float
Default
750 MHz or 312.64 ms