Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
44 SSA3000X Plus Programming Guide
Command
Format
[:SENSe]:BWIDth[:RESolution]:AUTO OFF|ON|0|1
[:SENSe]:BWIDth[:RESolution]:AUTO?
Instruction
Turns on/off auto resolution bandwidth state.
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return
0|1
Default
ON
Menu
BW > RBW
Example
:BWID:AUTO On
Command
Format
[:SENSe]:BWIDth:VIDeo <freq>
[:SENSe]:BWIDth:VIDeo?
Instruction
Specifies the video bandwidth.
Parameter
Type
Discrete
Parameter
Range
1 Hz, 3 Hz, 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz,
100 kHz, 300 kHz, 1 MHz
Return
Float, unit: Hz
Default
1 MHz
Menu
BW > VBW
Example
:BWIDth:VIDeo 10 KHZ
Command
Format
[:SENSe]:BWIDth:VIDeo:AUTO OFF|ON|0|1
[:SENSe]:BWIDth:VIDeo:AUTO?
Instruction
This command turns on/off auto video bandwidth state.
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return
0|1
Default
ON
Menu
BW > VBW
Example
BWIDth:VIDeo:AUTO OFF
Command
Format
[:SENSe]:BWIDth:VIDeo:RATio <number>
[:SENSe]:BWIDth:VIDeo:RATio?