Programming Guide

SIGLENT
28 SSA3000X Plus Programming Guide
4.Spectrum Analyzer
4.1 Frequency Subsection ............................................. 错误！未定义书签。
4.2 Amplitude Subsection ............................................. 错误！未定义书签。
4.3 Sweep Subsection.................................................... 错误！未定义书签。
4.4 Trigger Subsystem ................................................... 错误！未定义书签。
4.5 Bandwidth Subsection ............................................. 错误！未定义书签。
4.6 Trace Subsection...................................................... 错误！未定义书签。
4.7 Marker Subsection ................................................... 错误！未定义书签。
4.8 Limit Subsection ..................................................... 错误！未定义书签。
4.9 Measurement Subsystem ........................................ 错误！未定义书签。
4.10 TG Subsystem .......................................................... 错误！未定义书签。
4.11 Demod Subsystem ................................................... 错误！未定义书签。
4.1 Frequency Subsection
[:SENSe]:FREQuency:CENTer
[:SENSe]:FREQuency:STARt
[:SENSe]:FREQuency:STOP
[:SENSe]:FREQuency:CENTer:STEP[:INCRement]
[:SENSe]:FREQuency:CENTer:STEP:AUTO
[:SENSe]:FREQuency:CENTer:SET:STEP
[:SENSe]:FREQuency:OFFSet
[:SENSe]:FREQuency:SPAN
[:SENSe]:FREQuency:SPAN:FULL
[:SENSe]:FREQuency:SPAN:ZERO
[:SENSe]:FREQuency:SPAN:PREVious
[:SENSe]:FREQuency:SPAN:HALF
[:SENSe]:FREQuency:SPAN:DOUBle
Command
Format
[:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
Instruction
Sets the center frequency of the spectrum analyzer.
Gets the center frequency.