Programming Guide

SIGLENT
SSA3000X Plus Programming Guide 21
Command
Format
:SYSTem:COMMunicate:LAN:SMASk <“xxx.xxx.xxx.xxx”>
:SYSTem:COMMunicate:LAN:SMASk?
Instruction
Sets the subnet mask according to the PC network Settings. The subnet
mask will be set automatically if the IP assignment is set to DHCP.
Subnet Mask commands will be effective after using this “APPLy” command.
Gets Subnet Mask.
Parameter
Type
String
Parameter
Range
Conform to the IP standard (0-255:0-255:0-255:0-255)
Return
Subnet mask string
Default
None
Menu
System > Interface > LAN > Subnet Mask
Example
:SYSTem:COMMunicate:LAN:SMASk?
Command
Format
:SYSTem:COMMunicate:LAN:TYPE STATIC|DHCP
:SYSTem:COMMunicate:LAN:TYPE?
Instruction
Toggles the IP assignment Setting between static (manual) and DHCP
(dynamic assignment) mode.
Gets IP config.
Parameter
Type
Enumeration
Parameter
Range
STATIC|DHCP
Return
Enumeration
Default
None
Menu
System > Interface > LAN > IP Config
Example
:SYSTem:COMMunicate:LAN:TYPE DHCP
:SYSTem:COMMunicate:LAN:TYPE?
Command
Format
:SYSTem:LANGuage SCHINESE|ENGLISH
:SYSTem:LANGuage?
Instruction
Sets language.
Gets language.
Parameter
Type
Enumeration
Parameter
Range
SCHINESE: Chinese
ENGLISH: English
Return
Enumeration
Default
None
Menu
System > Language
Example
Sets language
:SYSTem:LANGuage SCHINESE
Gets language