Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
98 SSA3000X Plus Programming Guide
Instruction
Gets marker Y value
Parameter
Type
None
Parameter
Range
None
Return
Float
Default
None
Menu
None
Example
:TRACe:MARKer:Y?
Command
Format
:TRACe[1]|2|3|4:MARKer[1]|2|3|4:REFerence <integer>
:TRACe[1]|2|3|4:MARKer[1]|2|3|4:REFerence?
Instruction
Sets reference marker .
Gets reference marker
Cannot set the current marker to the reference marker.
Parameter
Type
Integer
Parameter
Range
1 ~ 4
Return
1 ~ 4
Default
2
Menu
Marker > Relative
Example
:TRACe:MARKer:REFerence 3
Command
Format
:CALCulate[:SELected]:MARKer:COUPle OFF|ON|0|1
:CALCulate[:SELected]:MARKer:COUPle?
Instruction
Sets marker couple state
Gets marker couple state
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return
0|1
Default
None
Menu
Marker > Couple
Example
:CALCulate:MARKer:COUPle ON
Command
Format
:CALCulate:MARKer:AOFF
Instruction
Close All Markers
Parameter
Type
None