Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
84 SSA3000X Plus Programming Guide
Example
:OUTPut ON
Command
Format
:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude] <value>
:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]?
Instruction
Sets TG level.
Gets TG level.
Parameter
Type
Float, unit: dBm
Parameter
Range
0 dBm ~ -20 dBm
Return
Float
Default
0 dBm
Menu
TG > TG Level
Example
:SOURce:POWer -20
Command
Format
:SOURce:CORRection:OFFSet <value>
:SOURce:CORRection:OFFSet?
Instruction
Sets TG level offsets.
Gets TG level offsets.
Parameter
Type
Float, unit: dBm
Parameter
Range
200 dBm ~ -200 dBm
Return
Float
Default
0 dBm
Menu
TG > Lel OffSets
Example
:SOURce:CORRection:OFFSet 1
Command
Format
:CALCulate:NTData[:STATe] OFF|ON|0|1
:CALCulate:NTData[:STATe]?
Instruction
Sets TG normalize on-off.
Gets TG normalize state.
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return
0|1
Default
0
Menu
TG > Normalize > Normalize
Example
:CALCulate:NTData ON