Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
78 SSA3000X Plus Programming Guide
Command
Format
[:SENSe]:SPECtrogram:STATe RUN|PAUSe
[:SENSe]:SPECtrogram:STATe?
Instruction
Sets spectrogram state.
Gets spectrogram state.
Parameter
Type
Enumeration
Parameter
Range
RUN: Start
PAUSe: Pause
Return
RUN|PAUSe
Default
RUN
Menu
Meas > Spectrum Monitor > Meas Setup > Spectrogram
Example
:SPECtrogram:STATe PAUSe
Command
Format
[:SENSe]:SPECtrogram:RESTart
Instruction
Restart spectrogram.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Meas > Spectrum Monitor > Meas Setup > Restart
Example
:SPECtrogram:RESTart
4.9.6 Third-order Intercept Point(TOI)
:MEASure:TOI?
:MEASure:TOI:IP3?
Command
Format
:MEASure:TOI?
Instruction
Gets the result of Third-order Intercept Point.
Parameter
Type
None
Parameter
Range
None
Return
Float
Default
None
Menu
Meas > TOI
Example
:MEASure:TOI?