Programming Guide

SIGLENT
76 SSA3000X Plus Programming Guide
Parameter
Type
None
Parameter
Range
None
Return
Float, unit: Hz
Default
None
Menu
Meas > Occupied BW
Example
: MEASure:OBW:CENTroid?
Command
Format
:MEASure:OBWidth:OBWidth:FERRor?
Instruction
Uses this command to query transmit frequency error.
Parameter
Type
None
Parameter
Range
None
Return
Float, unit: Hz
Default
None
Menu
Meas > Occupied BW
Example
:MEASure:OBWidth:OBWidth:FERRor?
4.9.4 SubsectionT-power(T-Power)
[:SENSe]:TPOWer:FREQuency:CENTer
[:SENSe]:TPOWer:LLIMit
[:SENSe]:TPOWer:RLIMit
:MEASure:TPOWer?
Command
Format
[:SENSe]:TPOWer:FREQuency:CENTer <freq>
[:SENSe]:TPOWer:FREQuency:CENTer?
Instruction
Sets T-power center frequency.
Gets T-power center frequency.
Parameter
Type
Float, unit: Hz, kHz, MHz, GHz
Parameter
Range
50 Hz~1.499999950 GHz
Zero Span: 0~1.5 GHz
Return
Float, unit: Hz
Default
750MHz
Menu
Meas > T-power > Meas Setup > Center Freq
Example
:TPOWer:FREQuency:CENTer 15kHz