Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
SSA3000X Plus Programming Guide 75
bandwidth span.
Gets dBc value.
Parameter
Type
Float
Parameter
Range
0.1~100
Return
Float
Default
26
Menu
Meas > Occupied BW > Meas Setup > dBc
Example
:OBWidth:XDB 3
Command
Format
:MEASure:OBWidth?
Instruction
Use this command to query the occupied bandwidth and bandwidth centroid
according to the method you set.
Parameter
Type
None
Parameter
Range
None
Return
Float, unit: Hz
Default
None
Menu
Meas > Occupied BW
Example
:MEASure:OBW?
Command
Format
:MEASure:OBWidth:OBWidth?
Instruction
Use this command to query the occupied bandwidth according to the method
you set.
Query Centroid Result.
Parameter
Type
None
Parameter
Range
None
Return
Float, unit: Hz
Default
None
Menu
Meas > Occupied BW
Example
:MEASure:OBW:OBW?
Command
Format
:MEASure:OBWidth:CENTroid?
Instruction
Use this command to query the occupied bandwidth according to the method
you set.