Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
SSA3000X Plus Programming Guide 73
Example
:CHPower:FREQuency:SPAN:POWer
Command
Format
:MEASure:CHPower?
Instruction
This command returns scalar results of main channel power, and power
density.
Parameter
Type
None
Parameter
Range
None
Return
Float, Channel Power unit: dBm
Float, Density unit: dBm/Hz
Default
None
Menu
Meas > Ch Power
Example
:MEASure:CHPower?
Command
Format
:MEASure:CHPower:CHPower?
Instruction
This command returns the value of the channel power in dBm units.
Parameter
Type
None
Parameter
Range
None
Return
Float
Default
None
Menu
Meas > Ch Power
Example
:MEASure:CHPower:CHPower?
Command
Format
:MEASure:CHPower:DENSity?
Instruction
This command returns the value of the channel power density in dBm/Hz.
Parameter
Type
None
Parameter
Range
None
Return
Float
Default
None
Menu
Meas > Ch Power
Example
:MEASure:CHPower:DENSity?