Programming Guide

SIGLENT
SSA3000X Plus Programming Guide 69
Command
Format
:INSTrument:MEASure
OFF|ACPR|CHPower|OBW|TPOWer |SPECtrogram|TOI
:INSTrument:MEASure?
Instruction
Sets measure mode.
Gets measure mode.
Parameter
Type
Enumeration
Parameter
Range
OFF: measure off
ACPR: ACPR
CHPower: Channel Power
OBW: Occupied BW
TPOWer: T-POWer
SPECtrogram: Spectrogram Monitor
TOI: Third-order Intercept Point
HARMonics: Harmonic analysis
CNR: Carrier Noise Ratio
Return
Enumeration
Default
OFF
Menu
Measure
Example
:INSTrument:MEASure ACPR
4.9.1 ACPR Subsection
[:SENSe]:ACPRatio:BWIDth:INTegration
[:SENSe]:ACPRatio:OFFSet:BWIDth[:INTegration]
[:SENSe]:ACPRatio:OFFSet[:FREQuency]
:MEASure:ACPRatio:MAIN?
:MEASure:ACPRatio:LOWer:POWer?
:MEASure:ACPRatio:LOWer?
:MEASure:ACPRatio:UPPer:POWer?
:MEASure:ACPRatio:UPPer?
Command
Format
[:SENSe]:ACPRatio:BWIDth:INTegration <freq>
[:SENSe]:ACPRatio:BWIDth:INTegration?
Instruction
Specifies the range of integration used in calculating the power in the main
channel.
Gets the range of integration used in calculating the power in the main
channel.
Parameter
Type
Float, unit: Hz, kHz, MHz, GHz
Parameter
Range
100 Hz~1.5 GHz
Return
Float, unit: Hz
Default
1MHz
Menu
Meas > ACPR > Meas Setup > Main Channel