Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
68 SSA3000X Plus Programming Guide
Command
Format
:CALCulate:LLINe:FAIL?
Instruction
This query returns the limits pass/failed result. If the test result fails, this
command will get result FAIL. If the test result passes, it will get result PASS.
Parameter
Type
None
Parameter
Range
None
Return
PASS|FAIL
Default
None
Menu
None
Example
:CALCulate:LLINe:FAIL?
Command
Format
:CALCulate:LLINe:FAIL:STOP OFF|ON|0|1
:CALCulate:LLINe:FAIL:STOP?
Instruction
Sets whether to stop the test if the test fails.
Gets whether to stop the test if the test fails.
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return
0|1
Default
OFF
Menu
Limit > Setup > Fail to stop
Example
:CALCulate:LLINe:FAIL:STOP OFF
4.9 Measurement Subsystem
ACPR
CHP
OBW
T-Power
SPECtrogram
TOI
CNR
Harmonics
:INSTrument:MEASure