Programming Guide

SIGLENT
SSA3000X Plus Programming Guide 61
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Peak > Peak Peak
Example
:CALCulate:MARKer1:CPSearch
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:FUNCtion OFF|FCOunt|NOISe|NDB
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:FUNCtion?
Instruction
This command selects the marker function for the designated marker.
Gets the selected marker function for the designated marker.
Parameter
Type
Enumeration
Parameter
Range
OFF: refers to the normal function.
FCOunt: refers to the frequency counter function.
NOISe: refers to the noise measurement function.
NDB: refers to the N dB bandwith function.
Return
Enumeration
Default
OFF
Menu
Marker Fn
Example
:CALCulate:MARK1:FUNCtion FCOunt
Command
Format
:CALCulate:MARKer:FCOunt[:STATe] ON|OFF|0|1
Instruction
To set the frequency counter status
Parameter
Type
Boolean
Parameter
Range
ON|OFF|0|1
Return
0|1
Default
0
Menu
Marker Fn > Freq Counter
Example
:CALCulate:MARK:FCOunt 1
Command
Format
:CALCulate:MARKer:FCOunt:X?
Instruction
To query the frequency counter
Parameter
Type
None