Programming Guide

SIGLENT
SSA3000X Plus Programming Guide 55
Default
None
Menu
Marker > M→Start Freq
Example
:CALCulate:MARKer1:START
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:STOP
Instruction
Sets the stop frequency to the value of the specified marker frequency. This
command is not available in zero span .
This command is valid when the Marker is on.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > Marker→Stop Freq
Example
:CALCulate:MARKer1:STOP
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:CENTer
Instruction
This command sets the center frequency equal to the specified marker
frequency, which moves the marker to the center of the screen. This
command is not available in zero span.
This command is valid when the Marker is on.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > M→CF
Example
:CALCulate:MARKer1:CENTer
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:STEP
Instruction
This command sets the center frequency step equal to the specified marker
frequency. This command is not available in zero span.
This command is valid when the Marker is on.
Parameter
Type
None
Parameter
Range
None
Return
None