Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
SSA3000X Plus Programming Guide 45
Instruction
Specifies the ratio of the video bandwidth to the resolution bandwidth.
Parameter
Type
Discrete, Float
Parameter
Range
0.001, 0.003, 0.01, 0.03, 0.1, 0.3, 1.0, 3.0, 10.0, 30.0, 100.0, 300.0, 1000.0
Return
Float
Default
1.0
Menu
BW > VBW/RBW
Example
:BWIDth:VIDeo:RATio 30
Command
Format
[:SENSe]:BWIDth:VIDeo:RATio:CONfig?
Instruction
This command turns on/off auto video to resolution bandwidth ratio.
Parameter
Type
None
Parameter
Range
None
Return
0|1
Default
1
Menu
None
Example
:BWIDth:VIDeo:RATio:CONfig?
Command
Format
[:SENSe]:FILTer:TYPE EMI|GAUSS
[:SENSe]:FILTer:TYPE?
Instruction
Sets filter type
Gets filter type
Parameter
Type
Enumeration
Parameter
Range
EMI|GAUSS
Return
Enumeration
Default
GAUSS
Menu
BW > Filter Type
Example
:FILTer:TYPE EMI
4.6 Trace Subsection
:TRACe[1]|2|3|4:MODE
:TRACe[:DATA]?
:FORMat[:TRACe][:DATA]