Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
38 SSA3000X Plus Programming Guide
Instruction
Set correction X data 1|2|3|4
Read correction X data.
Parameter
Type
None
Parameter
Range
None
Return
String
Default
None
Menu
None
Example
:CORRection:CSET2:DATA?
Command
Format
[:SENSe]:CORRection:IMPedance[:INPut][:MAGNitude] OHM50
|OHM75
[:SENSe]:CORRection:IMPedance[:INPut][:MAGNitude]?
Instruction
Set the input impedance for voltage-to-power conversions.
Get the input impedance.
Parameter
Type
Enumeration
Parameter
Range
OHM50 |OHM75
Return
OHM50 |OHM75
Default
OHM50
Menu
Amplitude > Corrections
Example
CORRection:IMPedance?
4.3 Sweep Subsection
[:SENSe]:SWEep:MODE
[:SENSe]:SWEep:TIME
[:SENSe]:SWEep:TIME:AUTO
[:SENSe]:SWEep:SPEed
[:SENSe]:SWEep:COUNt
[:SENSe]:QPD:DWELl:TIME
:INITiate[:IMMediate]
:INITiate:RESTart
:INITiate:CONTinuous
ABORt
Command
Format
[:SENSe]:SWEep:MODE AUTO|FFT|SWEep
[:SENSe]:SWEep:MODE?