Programming Guide

SIGLENT
36 SSA3000X Plus Programming Guide
Command
Format
[:SENSe]:CORRection:OFF
Instruction
Turn off the amplitude correction function off and all of the correction sets are
off.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
None
Example
:SENSe:CORRection:OFF
Command
Format
[:SENSe]:CORRection:CSET:ALL[:STATe] OFF|ON|0|1
[:SENSe]:CORRection:CSET:ALL[:STATe]?
Instruction
Turns on or off the amplitude corrections.
When turned on, only the correction sets that were turned on are enabled.
When turned off, all of the correction Sets are disabled. If there is no
correction enabled, state cannot be set to on.
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return
0|1
Default
OFF
Menu
Amplitude > Corrections > Apply Corrections
Example
:SENSe:CORRection:CSET:ALL:STATe OFF
Command
Format
[:SENSe]:CORRection:CSET[1]|2|3|4[:STATe]
[:SENSe]:CORRection:CSET[1]|2|3|4[:STATe]?
Instruction
Turns the amplitude correction function on/off.
Gets the amplitude correction function state.
Parameter
Type
None
Parameter
Range
None
Return
0|1
Default
OFF
Menu
Amplitude > Corrections > Correction1|2|3|4
Example
:CORRection:CSET2:OFF