Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
26 SSA3000X Plus Programming Guide
Instruction
Load file
Parameter
Type
String
Parameter
Range
None
Return
None
Default
None
Menu
File > Open/Load
Example
:MMEMory:LOAD STA, ”ABC.sta”
Command
Format
:MMEMory:DELete ”<file>”
Instruction
Delete file or folder
Parameter
Type
String
Parameter
Range
None
Return
None
Default
None
Menu
File > Operate > Delete
Example
:MMEMory:DELete ”ABC.sta”
3.4 Display Subsection
:DISPlay:WINDow:TRACe:GRATicule:GRID:BRIGhtness
:DISPlay:WINDow:TRACe:Y:DLINe:STATe
:DISPlay:WINDow:TRACe:Y:DLINe
Command
Format
:DISPlay:WINDow:TRACe:GRATicule:GRID:BRIGhtness <value>
:DISPlay:WINDow:TRACe:GRATicule:GRID:BRIGhtness?
Instruction
Sets grid brightness.
Gets grid brightness.
Parameter
Type
Integer
Parameter
Range
0 ~ 100
Return
Integer
Default
30%
Menu
Display > Grid Brightness
Example
:DISPlay:WINDow:TRACe:GRATicule:GRID:BRIGhtness 50